BUCKTOOL BD4801 3/4 HP 4x36 inch & 8 inch Belt Disc Sander Combo | Direct-drive Motor

• The sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change the damaged belt like before. We give one year warranty. For motor defective, we will replace a new machine, spare parts issue will send free parts for repair
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. 3/4 HP total enclosed induction motor supplies silent but powerful output
• The belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & humanized track control
• A sturdy cast aluminum base with a rubber foot prevents vibrations. 2 dust ports allow a dust-free operation when connecting with a dust collector. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• The two-in-one sanding machine includes both a 4 x 36-inch belt and an 8-inch disc. Angle adjustable work table with miter gauge used on both sanding disc and belt

Product Description

• 120V, 60HZ, 5.0A
• Disc size: 8 Inch
• Belt size: 4x36Inch
• Speed: 3450 RPM
• Belt speed: 2161 FPM

Are you looking for a versatile and reliable sander?

BUCKTOOL Belt Disc Sander is easy to polish all of the jagged edges and splinters on your wood and lumber and make it smooth. It is an idea for fine wood sanding & polishing.

Powerful motor

This sander was directly driven by a 3/4 HP induction motor, the motor provides enough power for small and large sanding operations on various materials.

Angle Adjustable

Angle adjustable work table with miter gauge can be used on both sanding disc and sanding belt. The sanding belt tilts up to 90 degrees vertical.

Maintenance Free

This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change the damaged cog belt like before.

Sanding disc protection during shipment

Few customers concern about the wobble of the disc, this was 100% controlled in the factory, but it will deform when facing terrible delivery. We have added a heavy steel cover to protect the disc sander for new delivery after. If you received a machine with a wobble disc, pls don't hesitate to send an email to us, We will give you a satisfactory service！

Horizontal&Vertical Sanding

The belt can work at the horizontal or vertical position, the belt comes with a large aluminum table that can adjust from 0-45 degrees.

Upgrade two work tables for both disc and belt

10.4 x 5.9-IN Cast Aluminum table tilts from 0 to 45 degrees for disc bevel sanding.

6.3 x 7.5-IN Aluminum table tilts from 0 to 45 degrees for belt bevel sanding.

Directly Driven

The sanding belt was directly driven by the 3/4 HP induction motor, a 25% sanding efficiency increase than the traditional design. And no need to worry about replacing the driving belt again!