Challenge yourself
Challenge yourself with the many delicate arms of this design.

 (1)

Recommended wood: Hardwood of choice,1/2."-3/4"(13-19mm) thick, 8 1/2"(21.6cm) square

Recommended drill bits: 3/64"” ( 1.2mm) & 1/16"(1.6mm) or #56 (1.2mm)&#52(1.6mm) for interior cutouts. Happy face eyes (24 places): 1/8" (3.2mm); center hole (1 place: 1/4”(6.4mm).

Recommended blades: #5 reverse skip-tooth or reverse tooth

Notes/special instructions: Take care when cutting circles. Be careful of cutting too quickly.

Recommended finishing: Danish oil or oil of choice.

(2)

Recommended wood: Hardwood of choice, 1/2"—-3/8”(13-19mm) thick, 8 1/2”(21.6cm) square

Recommended drill bits: 3/64" (1.2mm)& l/16"(1.6mm) or #56 ( 1.2mm) &#52(1.6mm) for interior cutouts. Large egg center holes (32 places);3/32"(2.4mm ); small egg center holes (72 places): 3/64" (1.2mm) or #56 (1.2mm); center hole (1place): 1/4"(6.4mm)

Recommended blades: #5 reverse skip-tooth or reverse tooth

Notes/special instructions: Be careful when drilling the small egg holes .For precise hole locations, a very steady hand is needed.

Recommended finishing: Danish oil or oil of choice.

(3)

Recommended wood: Hardwood of choice, 1/2-"-3/4"(13-19mm) thick, 8 1/2” (21.6cm) square

Recommended drill bits: l/l6” ( l.6mm)

Recommended blades: #5 reverse skip-tooth or reverse tooth

Notes/special instructions: Take your time; a steady hand is needed here for precise cutting.

Recommended finishing: Danish oil or oil of choice.

Leave a comment