DP12VL Parts

Short Description

Price
SKU
Rating
Discount
Vendor
Tags
Weight
Stock

★ Reviews

Let customers speak for us

921 reviews

Write a review

84%

(778)

15%

(136)

(7)

(1)

(0)

561

TDS-200HD-59-Right tool rest

Brandi Bishop

TDS-200HD-59-Right tool rest

BUCKTOOL 1-1/2HP 10 Inch Low Speed Bench Grinder, 1750 RPM Table Grinder with 13A Motor, High Precision Wobble-free Wheel Grinder, TDS-250

Kell

Great buy

This is amazing! It works great and my husband loves it.

BUCKTOOL 1-1/2HP 10 Inch Low Speed Bench Grinder, 1750 RPM Table Grinder with 13A Motor, High Precision Wobble-free Wheel Grinder, TDS-250

Kindle Customer

It’s so cute!

Let’s start with Weight; the grinder does not weigh a ton, which isn’t very pleasant when you have to move it around your shop. Next cause of it construction you need to be careful when you secure it to a grinding stand or a bench. The base is made of aluminum so you cannot tighten it as much as you can a cast-iron base. However, because of the balance of this particular machine, you don’t need to do that. I said it on my standard workbench and started it to make sure that it ran. It didn’t move an inch even on a dust covered bench. It was easy to assemble and change out the grinding wheels for the diamond wheels that I have for my lathe tools. The grinder size is just right for my shop and what I’m doing with my chisels. The grinder starts nice and slow and seem to have plenty of power once it gets up to speed. The durability will come in a lighter day due to the fact that I haven’t done anything other than set it up overall I would give this a good solid five star rating for what I’ve basically checked. the question I always ask what I buy another one from this company so far the answer to that is yes.

BUCKTOOL Bench Belt & Disc Sander Combo for Metalworking, 1HP Direct-Drive Motor, 4 x 36 in Belt, 8 in Disc BD4801-M

Adam

Great product, weird vacuum holes.

just got my 4 x 36 belt sander and I’ve been using it for everything wood metal Micarta and it doesn’t incredible job I love it. I just wish the vacuum ports worked better. Through different sizes than the one for the belt you can only stick the vacuum tube in like a quarter inch which is kind of ridiculous. I just sawed the things inside the vacuum port and now I can put the vacuum tube about an inch inch and a quarter. They send you weird adapters that don’t work. But the sander works perfectly.

BUCKTOOL Bench Belt & Disc Sander Combo for Metalworking, 1HP Direct-Drive Motor, 4 x 36 in Belt, 8 in Disc BD4801-M

Gilbert Morales

It’s ok.

1 2 3

Matthew

Nice grinder, happy with it

I am happy with this sander. I have replaced the stone wheel on the left with a wire brush, because that is what I needed, but since it was a standard size, that was not an issue. I did have issues a few times with parts getting pulled down, but I found that it was mostly related to how I had the table mounted, it was not mounted close enough. It is a little bit of a pain to change to different grits, not a 15 second swap, but maybe a minute or two. Since you do need to loosen that table out of the way, change the belt then get it back in place at the right distance.

BUCKTOOL Combo Belt Sander and Bench Grinder, 2" x 42" Belt, 6" Grinder, Knife Sharpener with Large Work Table, BG2600

Pete Blizzard

Great Value/Workmanship and QUIET!

The media could not be loaded.

Reviewing BUCKTOOL SCM8103 10-Inch Variable Speed Wet Sharpener …..I was impressively surprised at the overall workmanship/value at $229.Bucktool workmanship and finish…..overall metal case feels strong, tight and well assembled. The finish on my tool has a manufacturing defect on the surface of the top plate (photo) that does not impact function. Electrical toggle switch and speed knob are solid, smooth and crisp. Electrical power wire and plug meet spec.The 10” honing stone…… appeared smooth and worked well right out of the box. No vibration or wobble when spun at full speed (160 RPM). I was impressed that the stone was very close to true. The stone also turns bidirectional.Jig universal support arm …….. very close to square with the stone (photos). A number of reviews reported issues with this. I adjusted the jig alignment slightly with a little vice work.Stropping wheel…….wheel rotates smooth with only very slight wobble. But it feels “light weight”. It has very thin 1/16” leather (photo) and I suspect it may have to be replaced during the life of the machine. I did locate Bucktool parts (photo) and ordered an extra wheel, stone and jig-arm (being shipped from Hong Kong).Jigs….Nice to have two jigs (short knife and grinding/square-edge) provided. I use the Tormek square edge and truing jigs, which will work with this Bucktool. NOTE - The mounting position of the Bucktool support arm prevents the Tormek truing jig from anchoring on the arm shaft, so I will look at adding a “flat” on the jig-arm to help anchor the truing jig screw.Sharpened my first four plane blades today. Process was easy, and I am glad I used a waterproof mat…..water management vs RPM can be interesting. Sharpening took about 3-5 minutes per blade and my first edge (at 30 degrees) was reasonably smooth and square (photos). However, I did notice the stone is rough and will not leave an extremely smooth edge, especially when sharpening at less than 25 degrees (very fine chips in the blade’s leading edge).Happiness factor….I was pleasantly surprised how quiet this machine runs. Even at full 160 rpm, it is impressively quiet (video), especially when compared to other 10” stone sharpeners. Also, considering the cost, my plane blades sharpened well. But if you are looking for that “razor-super-sharp” result, this stone will probably not get you there. However subsequently lapping the blade on a flat diamond stone for a quick second bevel, does provide a very sharp blade that serves my wood shop well. First impressions, this feels like a solid investment.Overall, quite pleased with “first day” experience. The bidirectional variable-speed wheel that is ready "out of the box" with only minor tweaks, strong metal frame, square support arm, multiple jigs, stropping wheel, compound, 2 year warranty, great value-for-money and “really quiet” yields a healthy 5 stars.

BUCKTOOL 1-1/2HP 10 Inch Low Speed Bench Grinder, 1750 RPM Table Grinder with 13A Motor, High Precision Wobble-free Wheel Grinder, TDS-250

Dave Deimling

Sharpening system

I just started using the grinder and got the Wolverine- One-way sharpening jig set up. Looks good, works well, I like the extra features- brackets, magnifier, light. A great upgrade to my sharpening- especially lathe tools- gouges, etc!

8 Inch 3/4 HP Low-Speed Bench Grinder fit CBN Wheel Professional Wobble-free Wheel Grinder

Doggoville

Grinding jig included does not function—UDPATED

This review is for Bucktool’s 10” variable speed grinder. Overall I think this product is a good one— my wheel worked great out of the box without wobble, and I love the ability to change speeds. There was, however, a glaring issue. I am mostly planning on using this for grinding/sharpening chisels and plane irons (as well scissors and knives), and the grinding jig that they included is not designed correctly. There are stops on one side of the jig (shown in the first two pictures I attached) against which the chisel or the plane iron must be placed in order to keep the blade square. When the chisel or iron is placed against the stop, however, then it does not line up with the wheel. Moving it to the left sends the jig off of the rail, flipping it over and pushing to the right hits the rail support (see last 2 pictures attached). The chisel or iron could be sharpened by placing the chisel in the middle of the jig, away from stops, but that defeats the purpose of the stops, and makes it very difficult to guarantee squareness (see middle picture attached).I called Bucktool customer support, and after sending them pictures/video they understood what I was saying. First they told me I had to put the chisel in the middle away from stops. I explained why that is a problem. Then they told me they would have to reach out to their technical team to figure it out. They told me this was a new product, hinting that maybe there are still kinks being worked out. That was quite a few days ago. I will update this review when they respond. For now I would not recommend buying this until they have a solution.UPDATE:Bucktool fixed the problem. They designed a longer bar for the jig to run on and sent it to me right away. It works perfectly now. Changing my review to five stars, this is a very good grinder for the price.

BUCKTOOL 1-1/2HP 10 Inch Low Speed Bench Grinder, 1750 RPM Table Grinder with 13A Motor, High Precision Wobble-free Wheel Grinder, TDS-250

Joel Garbus

12 inch Drill press

Love it, adjustable speed is awesome, laser is accurate right out of the box without any adjustments. Light is nice and bright.

BUCKTOOL Bench Drill Press, 12-Inch, 6.2A, 3/4HP Variable Speed with Laser Guide and Work Light

Search

DP12VL Parts

Service Policy

About US

All Coliection

Contact

Need help

Cart

Your cart is empty

Let customers speak for us

Search

DP12VL Parts

Compare Products

Compare Products

Need help

Cart

Your cart is empty

Let customers speak for us